DDSED-REC STORM DRAIN DEFEND-RECTANGLE
Details
The STORM DRAIN DEFENDER traps pollutants, reducing and controlling the entrance of contaminants into our water systems.
The STORM DRAIN DEFENDER is a simple sheet of geo textile fabric supported by a wire frame. The entire unit is under the grate, no excess fabric extends above the grate, creating a safer environment for pedestrians. No trimming required.
The Storm Drain Defender is an inexpensive, easy to use Best Management Practice (BMP), a vital part of any Storm Water Pollution Prevention Plan.
The first step to comply with the stringent EPA standards.
Approved by WSDOT and ODOT Quality Products List.
Specifications:
The STORM DRAIN DEFENDER is a simple sheet of geo textile fabric supported by a wire frame. The entire unit is under the grate, no excess fabric extends above the grate, creating a safer environment for pedestrians. No trimming required.
The Storm Drain Defender is an inexpensive, easy to use Best Management Practice (BMP), a vital part of any Storm Water Pollution Prevention Plan.
The first step to comply with the stringent EPA standards.
Approved by WSDOT and ODOT Quality Products List.
Specifications:
- Size: Rectangular —Adjusts to fit Drains;
- smallest 16”X20”
- largest 28”X36”
- The single fabric sheet is 4’x5’
- The depth varies, depending on the size of the drain and how deep the fabric hangs down.
- Material: 8 oz Polypropylene, non-woven geotextile fabric
- Flow Rate: Maximum overflow rate varies depending on the level of debris and sediment that has accumulated in the fabric. Proper maintenance is mandatory to maintain maximum water flow.
- The STORM DRAIN DEFENDER units have overflow outlets to allow excessive water during heavy rain showers to bypass the system, reducing the chance of flooding or ponding
- Removes: Sediment, Litter, Debris
- Disposal: Disposal is dependent on nature of pollutants being collected. Disposal should be in accordance with local, state and federal regulations.
- Weight:
- Empty = STORM DRAIN DEFENDER units are approx. 2 lbs.
- Full = Weight of empty unit plus weight of sediment and water trapped in unit. Dry sediment could weigh 30-50 pounds. Fully loaded, wet units can weigh approximately 85-135 pounds.